GMDW 13 PLUS
GEOTHERMAL HEATING HEAT PUMP – DIRECT HEATING
| METRICS (H/B/T): | 115 X 60 X 65 |
| WEIGHT: | 128 |
| FLOW TEMPERATURE: | 65 |
| HEAT SOURCE: | GROUND-DIRECT HEATING |
| DHW TEMPERATURE: | 65 °C |
| VERSION: | HEAT |
| FUSE PROTECTION (A): | 10 |
| RATED VOLTAGE (V): | 400 |
| SCOP (35°C): | 5.42 |
| HEATING OUTPUT: | 11.3 |
| POWER CONSUMPTION: | 2.6 |
| COEFFICIENT OF PERFORMANCE: | 4.4 |
| OPERATING POINT E0/W50 | |
| HEATING OUTPUT: | 10,3 |
| POWER CONSUMPTION: | 3,3 |
| COEFFICIENT OF PERFORMANCE: | 3,1 |
| OPERATING POINT E0/W60 | |
| HEATING OUTPUT: | 10,2 |
| POWER CONSUMPTION: | 4,1 |
| COEFFICIENT OF PERFORMANCE: | 2,5 |
| OPERATING POINT E4/W35 | |
| HEATING OUTPUT: | 14,2 |
| POWER CONSUMPTION: | 2,8 |
| COEFFICIENT OF PERFORMANCE: | 5,1 |
- Compact appliance with 250 l cylinder
- For households with up to 4 residents
- Water temperature of up to 65 °C in heat pump mode
- Fully wired
- Straightforward installation
- With sensor well for third party thermostat/sensor
- With coil for external heat generators such as boilers and solar thermal systems
- Integral immersion heater as standard
- Possibility of DN 150 air duct up to 20 m
- One integral sacrificial magnesium anode as standard
- Pasteurisation circuit is part of the heat pump
- Tiptronic light controller
- Optimal heat input
Applications
DHW heating
Larder cooling
Basement dehumidification